ONI Rhytemper® HotPulse
Impulse temperature control at injection molding for high temperature applications
- Compact system of brass blocks
- Includes Profi visualisation unit with 10.4 inch touchscreen control panel, graphic process data display, tooling data storage and USB connection, OPC and Ethernet for data transfer
- Installation close to tooling
- Space saving machine integration
- Individual circuit lettering
- Heat level and flowrate monitoring of an unlimited number of temperature control circuits
- Automatic matching of the cooling pulse to the current pressure injetion molding process
- Interruption of the heat extraction during the mould filling phase and the tool movement
- Greatest possible flowrate through 1½ inch water connection
- Flowrate measurement by means of turbine
- Media supply possible via temperature control unit, technical heat source or the central cooling network
- Individual circuit flowrate calibration
- Uniform connection situation and pressure capacity with all expansion stages
cirsuit control | pneumatic valve | ||
|---|---|---|---|
measuring priciple | turbine | ||
measuring range flow | 0.3 – 40 l/min | ||
max. medium temperature | 160°C (320°F) | ||
measuring medium | water | ||
connection of main media flow | 1½ inch inner thread | ||
connection of consumer circuit | ½ inch inner thread | ||
nominal pressure | PN 16 |
RHYTEMPER® HotPulse – multiple circuit temperature control for the highest moulded part quality
In contrast to conventional temperature control systems the RHYTEMPER® HotPulse can be installed close to the tooling This enables the exact temperature and flowrate recording and regulation.
The modular design with preassembled, housed-in manifold blocks in addition to pre-wired electronic boxes enables space saving installation of the RHYTEMPER® HotPulse close to the tooling. The individual modules, whose number of circuits is tailored to the respective application, are connected to each other and to the main controller via a bus system.
Standards have been agreed with selected pressure injetion molding machine manufacturers for the installation of the RHYTEMPER® HotPulse modules directly in the machine manufacturer's works. Thus in the case of new machines the system can already be integrated by the manufacturer at their works and delivered together with the machine – economic temperature control can be that simple!
The operator interface of the RHYTEMPER® HotPulse is simply and clearly designed. The optimum settings for economic temperature control can be undertaken in just a few steps.
The heat level of each individual temperature control circuit is set individually to the respective moulded part-specific requirement and displayed in a coloured bar. Adaptation of the heat level is done quickly and simply via the setting function "hotter" or "colder".
Each temperature control/tooling circuit is allocated an appropriate mode of operation (mode) which is saved as a dataset and can be reactivated at any time.
Furthermore, with the RHYTEMPER® HotPulse numerous other special functions and setting options are available to the experienced application technician.