Oni Rhytemper - Die Temperatur auf den Punkt gebracht! Oni Rhytemper - Die Temperatur auf den Punkt gebracht!

PRECISE TEMPERATURE MANAGEMENT

deutsch

ONI Rhytemper® FlexControl

Multiple circuit impulse temperature control

The RHYTEMPER® multiple circuit temperature control FlexControl regulates the heat content of each individual temperature zone within the injection moulding tooling. In addition, the temperature and flowrate are measured.

  • Low maintenance brass block system
  • Includes Profi visualisation unit with 10.4 inch touchscreen control panel, graphic process data display, tooling data storage and USB connection for data transfer
  • Installation close to tooling
  • Space saving machine integration
  • Individual circuit lettering
  • Flowrate measurement by means of turbine, vortex or ultrasonic measuring system in the feed line
  • Heat level and flowrate monitoring of an unlimited number of temperature control circuits
  • Automatic matching of the cooling pulse to the current injection moulding process (self-optimising regulation)
  • Interruption of the heat extraction during the shot, the mould filling phase and the tool movement
  • Greatest possible flowrate with 1½ inch water connection (central)
  • Media supply possible via temperature control unit, technical heat source or the central cooling network
  • Individual circuit flowrate calibration
  • Uniform connection situation and pressure capacity with all expansion stages

circuit control

magnetic valve

magnetic valve

magnetic valve

measuring principle

turbine 

vortex

ultrasonic

measunring range flow

0.3 – 40 l/min

1.8 - 32 l/min

0.3 - 75 l/min

max. medium temperature

85 °C (185°F)

125°C (257°F)

100 °C (212°F)

measuring medium

water

water

water

connection of main medium flow

1½  inch inner thread

1½  inch inner thread

1½  inch inner thread

connection of consumer circuit

½ inch inner thread

½ inch inner thread

½ inch inner thread

nominal pressure

PN 10

PN 10

PN 10

Simple integration into the injection mold machine due to the compact design!

In contrast to conventional multiple circuit temperature control systems the RHYTEMPER® FlexControl can be integrated into the injction mold machine simply and seamlessly. Elaborate hose runs from the temperature control unit to the tooling are thereby a thing of the past.

The modular design with preassembled distributor blocks and pre-wired electronic boxes enables space saving installation of the temperature control unit directly on the clamping plate. The individual modules, whose number of circuits is tailored to the respective application, are connected to each other and to the main controller via a bus system.

Standards have been agreed with many injection molding machine manufacturers for the installation of the modules directly in the machine manufacturer's works. Thus in the case of new machines the RHYTEMPER® FlexControl system can already be integrated by the manufacturer at their works, piped up and delivered together with the machine.

Economic temperature control can be that simple!

The operator interface of the RHYTEMPER® FlexControl is simply and clearly designed. The optimum setting for economic temperature control is undertaken in just a few steps.

The heat level of each individual temperature control circuit is set individually to the respective moulded part-specific requirement and displayed in a coloured bar.

Adaptation of the heat level is done quickly and simply via the setting function "hotter" or "colder".

Each temperature control circuit is allocated an appropriate mode of operation (mode). Available as operating modes are, for example, control, actuate, duration or heat.

The set parameters can be assigned to the tooling set, saved as a dataset and reactivated at any time.

Furthermore, numerous helpful special functions and setting options are available to the experienced application technician for further process optimisation.

Haben Sie Fragen? Dann rufen
Sie uns an:
+49 35952 41100
© Copyright 2024 | ONI Rhytemper